Snub Nose 60L - Complete Kit - The LARGEST P.E.T. Pressure Fermenter with the highest level of control!
The 60L Fermenter King Snub Nose is big enough to match your homebrewing ambitions! It’s so big we had to put it on castor wheels!
The conical shape helps stack yeast at the bottom and minimises liquid contact with the trub from your fermentation.
This unit can be used by brewers to ferment their products under pressure, which delivers a much crisper, more neutral fermentation character than would otherwise be possible only if one were to invest in temperature control.
Brewers can also pressurise the vessel up to 35psi to carbonate and dispense direclty from Fermentasaurus like a keg! Alternativley brewers can transfer under pressure to stainless kegs without oxygen exposure.
Fermenter Body: High Molecular Length PET
Fermenter Volume: 60L
Frame: 304 Stainless Frame
Pressure Rated Lid: 304 Stainless Steel Ball Lock Posts, Glass Reinforced
Lid Seal: Nitrile Butadiene Rubber (NBR)
Working Pressure: 2.4Bar (35psi)
Burst Pressure: Above 8Bar
Test Pressure: 5Bar
Nylon neck ring, Polypropylene lid
2.4 bar (35psi) pressure relief valve
41cm wide across base of frame
87.5cm to top of the posts on the lid
Keg King highly advises using homebrew-grade cleaning chemicals like phosphoric acid-based sanitisers and non-caustic cleaners. Follow the recommended dilution rates on the product labels or from reputable homebrew books such as How To Brew by John Palmer.
Phosphoric acid sanitisers should have the pH range between 2.2 - 2.8. This is about a 1.5 - 2ml of sanitiser in 1L of water. Above the pH of 2.8, the sanitiser fails the 30-second test to prevent microbial growth. Below 2.2ph range, the sanitiser will affect the flavour of beer.
Easy to use, powerful design provides brewers with the ability to:
Ferment Under Pressure
Monitor Internal Temperature
Features our new flexible Gen 3 Design that provides brewers with:
New Thermowell – Get true liquid temperature readings
New Floating Dip Tube – Fixed central tank position
Optional Temp Control – Attach our Temp Control Kit to heat or cool your tank internally
CIP Capable – Attach our Cleaning Kit for easy Clean In Place clean up
60L/15.8G Conical Fermenter Tank
Stainless Steel Stand with Castors
Third Generation Pressure Lid
Floating Dip Tube with Centre Tank Alignment
Heat does more damage to PET fermenters than chemicals. At 55 degrees Celsius, the PET will soften and deform permanently. It is best to allow hot cleaning solutions to cool down to at least 30 degrees C before use.
Adhering to these recommendations will ensure the integrity of your fermenter tank for its useable life.
Pressure fermentation, although a cost effective and relatively good substitute for temperature control, is not a perfect substitute, thus it is recommended to use pressure fermentation in tandem with temperature control to achieve optimal results.
Sanitize properly and keep in a cool, dry place.
60L Snub Nose - Gen3
- Product Code: Equipment
- Availability: In Stock
- Ex Tax: R1,937.20