General Description

Fermenter King 60L Uni Tank - Complete Kit - The LARGEST P.E.T. Pressure Fermenter with the highest level of control!

The 60L Fermenter King is big enough to match your homebrewing ambitions! It’s so big we had to put it on castor wheels!

This unit can be used by brewers to ferment their products under pressure, which delivers a much crisper, more neutral fermentation character than would otherwise be possible only if one were to invest in temperature control.

Brewers can also pressurise the vessel up to 35psi to carbonate and dispense direclty from Fermenter King like a keg! Alternativley brewers can transfer under pressure to stainless kegs without oxygen exposure.

Fermenter Specs:

Fermenter Body:                 High Molecular Length PET

Fermenter Volume:             60L

Plunge Valve                       304 Stainless 

Frame:                                 304 Stainless Frame

Pressure Rated Lid:            304 Stainless Steel Ball Lock Posts, Glass Reinforced

Lid Seal:                              Nitrile Butadiene Rubber (NBR)

Working Pressure:               2.4Bar (35psi)

Burst Pressure:                    Above 8Bar

Test Pressure:                      5Bar

Nylon neck ring, Polypropylene lid

2.4 bar (35psi) pressure relief valve

Dimensions:

115cm Height from castor wheels to top of plunge valve in closed position

117.5cm Height from castor wheels to top of plunge valve in open position

41cm wide across base of frame

More Information:

Keg King highly advises using homebrew-grade cleaning chemicals like phosphoric acid-based sanitisers and non-caustic cleaners. Follow the recommended dilution rates on the product labels or from reputable homebrew books such as How To Brew by John Palmer. 

Phosphoric acid sanitisers should have the pH range between 2.2 - 2.8. This is about a 1.5 - 2ml of sanitiser in 1L of water. Above the pH of 2.8, the sanitiser fails the 30-second test to prevent microbial growth. Below 2.2ph range, the sanitiser will affect the flavour of beer. 

Easy to use, powerful design provides brewers with the ability to:

Ferment Under Pressure

Clarify and Collect Yeast

Dryhop Sanitarily

Carbonate

Monitor Internal Temperature

Serve

 Features our new flexible Gen 3 Design that provides brewers with:

New Plunger Valve – More Sanitary and easy to use

New Thermowell – Get true liquid temperature readings

New Floating Dip Tube – Fixed central tank position

New Tri-clover Compatibility – attach any number of 2inch tri-clover accessories

Optional Temp Control – Attach our Temp Control Kit to heat or cool your tank internally

CIP Capable – Attach our Cleaning Kit for easy Clean In Place clean up

Compatible with Gen 1 collection bottles

Includes:

60L/15.8G Conical Fermenter Tank

Collection Bottle

Plunge Dump Valve/Thermowell

Stainless Steel Stand with Castors

Third Generation Pressure Lid

Floating Dip Tube with Centre Tank Alignment

Disclaimer:

Heat does more damage to PET fermenters than chemicals. At  55 degrees Celsius, the PET will soften and deform permanently. It is best to allow hot cleaning solutions to cool down to at least 30 degrees C before use.

Adhering to these recommendations will ensure the integrity of your fermenter tank for its useable life. 

Pressure fermentation, although a cost effective and relatively good substitute for temperature control, is not a perfect substitute, thus it is recommended to use pressure fermentation in tandem with temperature control to achieve optimal results.

Ball Locks and Spunding Valve not included

For pressure fermentation a Spunding Valve or Pressure Release Valve (PRV) will need to be purchased additionally.

10 psi PRV for Ale

15 psi PRV for Lager

Storage:

Sanitize properly and keep in a cool, dry place.

CLICK HERE FOR INSTRUCTIONS