Fermenter King 60L Uni Tank - Complete Kit - The LARGEST P.E.T. Pressure Fermenter with the highest level of control!
The 60L Fermenter King is big enough to match your homebrewing ambitions! It’s so big we had to put it on castor wheels!
This unit can be used by brewers to ferment their products under pressure, which delivers a much crisper, more neutral fermentation character than would otherwise be possible only if one were to invest in temperature control.
Brewers can also pressurise the vessel up to 35psi to carbonate and dispense direclty from Fermenter King like a keg! Alternativley brewers can transfer under pressure to stainless kegs without oxygen exposure.
Fermenter Body: High Molecular Length PET
Fermenter Volume: 60L
Plunge Valve 304 Stainless
Frame: 304 Stainless Frame
Pressure Rated Lid: 304 Stainless Steel Ball Lock Posts, Glass Reinforced
Lid Seal: Nitrile Butadiene Rubber (NBR)
Working Pressure: 2.4Bar (35psi)
Burst Pressure: Above 8Bar
Test Pressure: 5Bar
Nylon neck ring, Polypropylene lid
2.4 bar (35psi) pressure relief valve
115cm Height from castor wheels to top of plunge valve in closed position
117.5cm Height from castor wheels to top of plunge valve in open position
41cm wide across base of frame
Keg King highly advises using homebrew-grade cleaning chemicals like phosphoric acid-based sanitisers and non-caustic cleaners. Follow the recommended dilution rates on the product labels or from reputable homebrew books such as How To Brew by John Palmer.
Phosphoric acid sanitisers should have the pH range between 2.2 - 2.8. This is about a 1.5 - 2ml of sanitiser in 1L of water. Above the pH of 2.8, the sanitiser fails the 30-second test to prevent microbial growth. Below 2.2ph range, the sanitiser will affect the flavour of beer.
Easy to use, powerful design provides brewers with the ability to:
Ferment Under Pressure
Clarify and Collect Yeast
Monitor Internal Temperature
Features our new flexible Gen 3 Design that provides brewers with:
New Plunger Valve – More Sanitary and easy to use
New Thermowell – Get true liquid temperature readings
New Floating Dip Tube – Fixed central tank position
New Tri-clover Compatibility – attach any number of 2inch tri-clover accessories
Optional Temp Control – Attach our Temp Control Kit to heat or cool your tank internally
CIP Capable – Attach our Cleaning Kit for easy Clean In Place clean up
Compatible with Gen 1 collection bottles
60L/15.8G Conical Fermenter Tank
Plunge Dump Valve/Thermowell
Stainless Steel Stand with Castors
Third Generation Pressure Lid
Floating Dip Tube with Centre Tank Alignment
Heat does more damage to PET fermenters than chemicals. At 55 degrees Celsius, the PET will soften and deform permanently. It is best to allow hot cleaning solutions to cool down to at least 30 degrees C before use.
Adhering to these recommendations will ensure the integrity of your fermenter tank for its useable life.
Pressure fermentation, although a cost effective and relatively good substitute for temperature control, is not a perfect substitute, thus it is recommended to use pressure fermentation in tandem with temperature control to achieve optimal results.
Ball Locks and Spunding Valve not included
For pressure fermentation a Spunding Valve or Pressure Release Valve (PRV) will need to be purchased additionally.
10 psi PRV for Ale
15 psi PRV for Lager
Sanitize properly and keep in a cool, dry place.
60L Fermenter King Unitank Gen3
- Product Code: Kegging
- Availability: In Stock
- Ex Tax: R2,095.00